Several months ago I’ve got myself the MINI VCI cable J2534 to play with. As it turned out, with little manual it is easy to operate, follow the popular belief, to get it working under Windows XP 64-bit. So, I decided to share the instructions, hope to help someone who has a headache of dealing with virtual machines with Windows XP.

Connect the Mini-VCI cable to the USB port of the computer. Start “Device Manager”: a. If two unknown devices are displayed, then install the drivers manually, specifying the C: Program Files XHorse Electronics MVCI Driver for TOYOTA TIS folder to search for drivers and tick the box “Include subfolders”. Mar 21, 2016 - A couple years ago, I bought the MINI-VCI adapter with drivers. Download the 'Toyota Techstream Installation Manual - Windows 10.pdf.

Equipment:

1. MINI VCI J2534 cable for TOYOTA TIS Techstream

(I bought this from worldobd2.com for $42 free shipping)

2. A laptop. Mine is actually Windows XP 64-bit, but for Windows 7 the configuration procedure should be identical.

Steps:

The Techstream software, MVCI drivers and TIS Key all can be found on the Internet as well.

First of all, insert the CD to your driver

1. Install Techstream NDSI setup driver

Open “My computer”

Open “Mini VCI GTS 10.00.028” CD software

Open and run “GTS-10.00.028-NDSI” setup driver

Select Techstream software language: English, click “Next”

Install software Wizard, click “Next”

Accept license agreement

Confirm customer information

Click “Finish” when wizard is complete installed

2. Activate 10.00.028 Toyota TIS Techstream

Go to C:Program FilesToyota DiagnosticsTechstreamEnvIT3System.ini

Change TISFunction=1 to TISFunction=0

Click Ok to save setting

3. Install MVCI driver 2.0.1

Open “Mini VCI Driver” folder on the disk

Install “Mini-VCI Driver for TOYOTA-CABLE 2.0.1”

Click “Next” and then “Install”

Click “Finish” when driver is installed

4. Check COM port setting

Open “My computer”>> “Device Manager” >> “USB Serial PORT(COM4)”

Make sure COM port is set to COM4

5. Run Mini VCI firmware update tool

Open “Mini VCI firmware update tool” on the desktop

Click “Device Info” to check detail device information, SN, firmware version etc

6. Configure 00.028 Techstream

Open “Tehcstream” software on the desktop

Click “NO” when system pops out Java message

Select “Setup” Tab >> “Techstream Configuration”

Select Area

Select language: English

7. Try to test my car

Connect MVCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle” on the left function list. Wait. Then wait again (by the way, you’ll be doing that a lot with this cable ). If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.

So far, I tested the cable with 2013 4Runner, 2004 Sienna and 1997 Camry LE/4cyl, and it seems to work fine with all of them. Absence of (L) line connection means no support for ECU re-flashing (which is not something I’m comfortable doing myself anyway). Option customization/clearing DTC is possible (already verified).

Overall, not bad for a $42 gadget, in my opinion.

Good luck!

We would like to show you a description here but the site won’t allow us. Nov 10, 2018  View your images in real time from a camera connected to Magelis XBT GT or iPC. Vijeo designer 6.1 download. Browse products from Schneider Electric - WW in Software for Vijeo Designer - Configuration software for the complete HMI range.